All new WINDFORCE Stack cooling with 3X 100mm fans in an innovative stacking structure for enhanced heat dissipation.
The 3x 100mm stack fans provide larger and more smooth airflow. And with more heatsink coverage than 3x 80mm fans, WINDFORCE stack fans will have 10% better cooling performance.
Make 3x 100mm stack fans into less than 300mm length area. To concentrate and enlarge the airflow on the whole heatsink for the most efficient heat dissipation.
The middle fan spins in the reverse direction to optimize the airflow to dissipate the heat more effective for accomplishing higher performance at a lower temperature.
The airflow is spilt by the triangle fan edge, and guided smoothly through the 3D stripe curve on the fan surface, effectively enhancing the airflow.
The double ball bearing structure has better heat endurance and efficiency than sleeve structure.
The AORUS graphics cards are equipped with 3D-Active Fan. The fans will remain off when the GPU is under a set loading or temperature for low power gaming. The LED fan indicator on the top of the graphics card provides an instant display of the fan status.
With the better system airflow, the direction of the copper plate will help to increase the cooling performance.
The angular and unequal fins height does not only channel the airflow through the fins and enlarge the contact surface but also results in a lower noise level and better cooling capacity.
The composite heat-pipes combines both thermal conductivity and phase transition for efficiently managing the transfer of heat between two solid interfaces which increases 29% of cooling capacity.
Learn more about RGB Fusion 2.0
CYCLING
Smoothly
cycles through all colors
CONSISTENT
Choose
a color for static light
FLASH
Choose
a color for flash effect
DUAL FLASH
Choose
a color for double flash effect
BREATHING
Choose
a color to fade in and out
Glorious black metal back plate provides the solid protection, strengthens the structure and inspires the passion for gaming.
Dust -resistant shields the circuit board from dust, insects, dropped screws, drill shavings, and abrasion.
Moisture-resistant prevents unwanted conduction paths and board damage.
Corrosion-resistant protects boards from environmental contaminants, such as salt spray, humidity, and
corrosion.
Be alert when PCI-E voltage is unstable with
the smart power LED indicators. When experiencing any power abnormality, the indicator will alert gamers by
flashing light.
Light on : power cable disconnected
Light off : stable
power supply
Blinking : abnormal power supply
Compared to the reference design, the 12+2 power phases on the card make the MOSFET working at a lower
temperature and provide more stable voltage output. Over temperature protection and load balance to each
MOSFET can effectively extend the card life.
AORUS Graphics Cards are engineered with the same highest-grade chokes and capacitors as those of Titan X, delivering high quality performance and longer system lifespan.
Fully automated production process ensures top quality of the circuit boards and eliminates sharp protrusions of the solder connectors seen on the conventional PCB surface. This friendly design prevents your hands from getting cut or inadvertently damaging components when making your build.
Supports for 2-way SLI configuration, AORUS SLI HB(High Bandwidth) bridge doubles the available transfer bandwidth bridge compared to the previous generation to deliver ultimate experience at 4K gameplay or surround gaming.
